FPD 60 Series
Schiatti Angelo’s heavy-duty double headed automatic glass drilling machine.
Time proven design capable 100mm diameter holes in automatic mode and 200mm diameter holes in manual mode in glass thicknesses of up to 28mm.
FPD 60XY available with PLC control for pre programmed automated positioning stop control
TFV has been designed and built to carry out holes up to a maximum diameter of 85mm and mill shapes on glass sheets with a thickness ranging from 3mm to 15mm. The machine consists of three independent sections: an entry conveyor, a closed central chamber where the glass is processed and, an exit conveyor.
The structure of the machine is open top and allows the transit of glass-sheets of any dimension. Completely automated the machine elements are managed by an axis control and high quality driven gears.
The FPMM series are designed with multiple heads for the purpose of being able to drill up to four holes simultaneously.
topDRILL 130 Easy
topDRILL 130 Easy is our established and robust starter model for double-sided semi-automatic glass drilling machines. The specification of the machine is complete; the operation is optimised by using a PLC. The stable version with the fixed support height also allows the processing of heavy glasses with large dimensions.
topDRILL 130 nc
topDRILL 130 nc is a fully automatic double-sided glass drilling machine with digital drilling heads and automatic glass transport. All movements are controlled through the display, there are no manual adjustments necessary. After a tool change, tools are automatically measured.
The operator must only place the glass and start the program. topDRILL 130 Easy is our established and robust starter model for double-sided semi-automatic glass drilling machines. The specification of the machine is complete; the operation is optimised by using a PLC. The stable version with the fixed support height also allows the processing of heavy glasses with large dimensions.
topDRILL 240 nc
topDRILL 240 nc is the big version of our fully automatic drilling machines. The device works without operator intervention. All drill positions and length of the drill bit will be set automatically.
topDRILL 130 RX smart-5
The topDRILL 130 RX smart-5, is together with the 240 RX smart-5 the best-selling device for the entire series. The ingenious tool changer is very fast, relatively simple and absolutely uncomplicated to use. Deep countersinking front and rear will be made without any restrictions irrespective of tool diameter. The first tool change takes place during the drilling process on the opposite side. The high-performance spindles are water-cooled, extremely robust and durable without high maintenance costs!
topDRILL 130 RX speed-10
The topDRILL 130 RX speed 10 is the new highlight in vertical drilling technology. Both front and rear tool change can carry up to 10 tools on each side. The intelligent tool changer sorts the next tool during processing. No set-up times, and the high number of tools in conjunction with the simple and sophisticated programming make the RX speed 10 favorites in the pre-processing.
topDRILL 240 RX smart-5
Our topDRILL 240 RX smart-5 has been the favorite vertical glass processing machine for many years. The total flexibility and ease of programming make this machine an obvious choice. Extremely low maintenance costs through the use of robust and proven components, ease of coupling to other equipment, and simple to use software solutions are major selling points.